Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unidades: Métrico
Base

Elija una unidad para cualquier magnitud; las demás siguen el sistema de arriba.

HC 2x1.5-6 close-coupled pump, 3,500 RPM, 316 stainless

HC 2x1.5-6 close-coupled pump, 3,500 RPM, 316 stainless

Modelo: HC-2X1.5-6-35-SS

Close-coupled end-suction centrifugal pump, all 316 stainless (CF8M) casing and enclosed impeller, Type 21 mechanical seal (carbon / silicon carbide / FKM), on a NEMA JM-shaft TEFC premium-efficiency motor. Back pull-out: the motor and rotating assembly lift out without disturbing the piping.

Especificaciones

Tamaño y construcción
Size2x1.5-6
Suction size (in)2
Discharge size (in)1½
ConnectionsNPT threaded
Velocidad nominal3500 RPM
ImpellerEnclosed
Diámetro del impulsor, máximo159 mm(6-1/4 in)
Impeller diameter, minimum trim114 mm(4-1/2 in)
CasingASTM A743 CF8M (316 SS)
Impeller materialASTM A743 CF8M (316 SS)
Mechanical sealType 21, carbon / silicon carbide / FKM
Maximum working pressure17,2 bar(250 psi)
Maximum liquid temperature121 °C(250 °F)
Maximum solids size4,83 mm(3/16 in)
Hidráulica, impulsor máximo
Caudal en el punto de máxima eficiencia29,5 m³/h(130 GPM)
Altura en el punto de máxima eficiencia40,4 m(132,6 ft)
Efficiency at BEP (%)60
Shutoff head49,3 m(161,6 ft)
Maximum flow (end of curve)38,4 m³/h(169 GPM)
NPSH requerido en el punto de máxima eficiencia2,41 m(7,9 ft)
Maximum power, water (end of curve)6,26 kW(8,4 HP)
Prestaciones calculadas
Shaft power at BEP5,41 kW(7,26 HP)
Head rise to shutoff (%)22
Preferred operating region, from20,7 m³/h(91 GPM)
Preferred operating region, to35,4 m³/h(156 GPM)
Motor
Standard motor rating7,46 kW(10 HP)
Motor frame215T
Verificación del motorNon-overloading
Max. specific gravity, non-overloading1,19
Dimensiones y peso
Overall length876 mm(34,5 in)
Base to discharge face297 mm(11,7 in)
Weight with motor108 kg(238 lb)
Certificación
NSF/ANSI/CAN 61 listedNo

Productos relacionados

Imágenes

  • HC-2X1.5-6-35-SS-outline.svg

Curvas de rendimiento

Head–capacity
1020304050010203040 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0204060010203040 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
02468010203040 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
11.522.533.5010203040 Flow (m³/h) NPSHr (m)

Descargas