Halvard Pump Works
Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.
HC 2x1.5-8 close-coupled pump, 3,500 RPM, bronze-fitted
Modelo: HC-2X1.5-8-35-CI
Close-coupled end-suction centrifugal pump, bronze-fitted: ASTM A48 Class 30 cast-iron casing, cast-bronze enclosed impeller, Type 21 mechanical seal (carbon / ceramic / Buna-N), on a NEMA JM-shaft TEFC premium-efficiency motor. Back pull-out construction.
Especificaciones
| Tamaño y construcción | |
|---|---|
| Size | 2x1.5-8 |
| Suction size (in) | 2 |
| Discharge size (in) | 1½ |
| Connections | NPT threaded |
| Velocidad nominal | 3500 RPM |
| Impeller | Enclosed |
| Diámetro del impulsor, máximo | 210 mm(8-1/4 in) |
| Impeller diameter, minimum trim | 152 mm(6 in) |
| Casing | ASTM A48 Class 30 cast iron |
| Impeller material | Cast bronze (ASTM B584 C87600) |
| Mechanical seal | Type 21, carbon / ceramic / Buna-N |
| Maximum working pressure | 12,1 bar(175 psi) |
| Maximum liquid temperature | 107 °C(225 °F) |
| Maximum solids size | 4,83 mm(3/16 in) |
| Hidráulica, impulsor máximo | |
| Caudal en el punto de máxima eficiencia | 34,1 m³/h(150 GPM) |
| Altura en el punto de máxima eficiencia | 70,4 m(231 ft) |
| Efficiency at BEP (%) | 53 |
| Shutoff head | 85,9 m(281,7 ft) |
| Maximum flow (end of curve) | 44,3 m³/h(195 GPM) |
| NPSH requerido en el punto de máxima eficiencia | 2,68 m(8,8 ft) |
| Maximum power, water (end of curve) | 14,3 kW(19,11 HP) |
| Prestaciones calculadas | |
| Shaft power at BEP | 12,3 kW(16,51 HP) |
| Head rise to shutoff (%) | 22 |
| Preferred operating region, from | 23,8 m³/h(105 GPM) |
| Preferred operating region, to | 40,9 m³/h(180 GPM) |
| Motor | |
| Standard motor rating | 14,9 kW(20 HP) |
| Motor frame | 256T |
| Verificación del motor | Non-overloading |
| Max. specific gravity, non-overloading | 1,05 |
| Dimensiones y peso | |
| Overall length | 1054 mm(41,5 in) |
| Base to discharge face | 351 mm(13,8 in) |
| Weight with motor | 182 kg(401 lb) |
| Certificación | |
| NSF/ANSI/CAN 61 listed | Sí |
Productos relacionados
Standard motor
Imágenes
Curvas de rendimiento
- Maximum impeller
- Intermediate impeller
- Minimum impeller
- Maximum impeller
- Minimum impeller
- Standard motor rating
Descargas
- HC Close-Coupled Pumps — Installation, Operation & MaintenanceManual de instalación · 51 KB
- NSF/ANSI/CAN 61 listing letter, HC bronze-fitted pumps (annual review)Certificado · 47 KB
- ISO 9001:2015 certificate, Fort Wayne plantCertificado · 46 KB