Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unités: Métrique
Base

Choisissez une unité par grandeur ; les autres suivent le système ci-dessus.

HV 2-6 vertical sump pump, 3,500 RPM

HV 2-6 vertical sump pump, 3,500 RPM

Modèle: HV-2-6-35

Vertical cantilever sump pump: the shaft is supported by two bearings above the mounting plate, with no bearings or seals below the liquid, so it can run dry and handle solids. Cast-iron casing and column, semi-open impeller, suction strainer, NEMA C-face TEFC premium-efficiency motor.

Spécifications

Taille et construction
Size2-6
Discharge size (in)2
Discharge connectionNPT threaded
Vitesse nominale3 500 RPM
ImpellerSemi-open
Diamètre de roue, maximal152 mm(6 in)
Impeller diameter, minimum trim114 mm(4-1/2 in)
Wetted materialsASTM A48 Class 30 cast iron, 416 SS shaft
Maximum solids size12,7 mm(1/2 in)
Maximum liquid temperature82,2 °C(180 °F)
Installation
Setting depth, as quoted914 mm(36 in)
Setting depths available24 in, 36 in, 48 in, 60 in
Mounting plate (square)508 mm(20 in)
Minimum submergence above inlet178 mm(7 in)
Minimum pit depth1 067 mm(42 in)
Weight with motor, as quoted122 kg(270 lb)
Hydraulique, roue maximale
Débit au point de meilleur rendement27,3 m³/h(120 GPM)
Hauteur au point de meilleur rendement37,2 m(122,2 ft)
Efficiency at BEP (%)56
Shutoff head45,4 m(149 ft)
Maximum flow (end of curve)35,4 m³/h(156 GPM)
NPSH requis au point de meilleur rendement2,38 m(7,8 ft)
Maximum power, water (end of curve)5,7 kW(7,65 HP)
Performances calculées
Shaft power at BEP4,93 kW(6,61 HP)
Head rise to shutoff (%)22
Preferred operating region, from19,1 m³/h(84 GPM)
Preferred operating region, to32,7 m³/h(144 GPM)
Moteur
Standard motor rating7,46 kW(10 HP)
Motor frame215T
Vérification du moteurNon-overloading
Max. specific gravity, non-overloading1,31

Produits associés

Images

  • HV-2-6-35-outline.svg

Courbes de performance

Head–capacity
1020304050010203040 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0204060010203040 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
02468010203040 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
11.522.533.5010203040 Flow (m³/h) NPSHr (m)

Téléchargements