Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unités: Métrique
Base

Choisissez une unité par grandeur ; les autres suivent le système ci-dessus.

HV 1.5-8 vertical sump pump, 1,750 RPM

HV 1.5-8 vertical sump pump, 1,750 RPM

Modèle: HV-1.5-8-17

Vertical cantilever sump pump: the shaft is supported by two bearings above the mounting plate, with no bearings or seals below the liquid, so it can run dry and handle solids. Cast-iron casing and column, semi-open impeller, suction strainer, NEMA C-face TEFC premium-efficiency motor.

Spécifications

Taille et construction
Size1.5-8
Discharge size (in)1½
Discharge connectionNPT threaded
Vitesse nominale1 750 RPM
ImpellerSemi-open
Diamètre de roue, maximal203 mm(8 in)
Impeller diameter, minimum trim152 mm(6 in)
Wetted materialsASTM A48 Class 30 cast iron, 416 SS shaft
Maximum solids size19 mm(3/4 in)
Maximum liquid temperature82,2 °C(180 °F)
Installation
Setting depth, as quoted914 mm(36 in)
Setting depths available24 in, 36 in, 48 in, 60 in
Mounting plate (square)457 mm(18 in)
Minimum submergence above inlet152 mm(6 in)
Minimum pit depth1 067 mm(42 in)
Weight with motor, as quoted89,4 kg(197 lb)
Hydraulique, roue maximale
Débit au point de meilleur rendement13,6 m³/h(60 GPM)
Hauteur au point de meilleur rendement16,6 m(54,3 ft)
Efficiency at BEP (%)45
Shutoff head20,2 m(66,2 ft)
Maximum flow (end of curve)17,7 m³/h(78 GPM)
NPSH requis au point de meilleur rendement0,61 m(2 ft)
Maximum power, water (end of curve)1,58 kW(2,12 HP)
Performances calculées
Shaft power at BEP1,36 kW(1,83 HP)
Head rise to shutoff (%)22
Preferred operating region, from9,54 m³/h(42 GPM)
Preferred operating region, to16,4 m³/h(72 GPM)
Moteur
Standard motor rating2,24 kW(3 HP)
Motor frame182T
Vérification du moteurNon-overloading
Max. specific gravity, non-overloading1,42

Produits associés

Images

  • HV-1.5-8-17-outline.svg

Courbes de performance

Head–capacity
51015202505101520 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0102030405005101520 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
00.511.522.505101520 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.20.40.60.8105101520 Flow (m³/h) NPSHr (m)

Téléchargements