Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unidades: Métrico
Base

Elija una unidad para cualquier magnitud; las demás siguen el sistema de arriba.

HV 2-8 vertical sump pump, 1,750 RPM

HV 2-8 vertical sump pump, 1,750 RPM

Modelo: HV-2-8-17

Vertical cantilever sump pump: the shaft is supported by two bearings above the mounting plate, with no bearings or seals below the liquid, so it can run dry and handle solids. Cast-iron casing and column, semi-open impeller, suction strainer, NEMA C-face TEFC premium-efficiency motor.

Especificaciones

Tamaño y construcción
Size2-8
Discharge size (in)2
Discharge connectionNPT threaded
Velocidad nominal1750 RPM
ImpellerSemi-open
Diámetro del impulsor, máximo203 mm(8 in)
Impeller diameter, minimum trim152 mm(6 in)
Wetted materialsASTM A48 Class 30 cast iron, 416 SS shaft
Maximum solids size19 mm(3/4 in)
Maximum liquid temperature82,2 °C(180 °F)
Instalación
Setting depth, as quoted914 mm(36 in)
Setting depths available24 in, 36 in, 48 in, 60 in
Mounting plate (square)508 mm(20 in)
Minimum submergence above inlet178 mm(7 in)
Minimum pit depth1067 mm(42 in)
Weight with motor, as quoted97,5 kg(215 lb)
Hidráulica, impulsor máximo
Caudal en el punto de máxima eficiencia27,3 m³/h(120 GPM)
Altura en el punto de máxima eficiencia16,6 m(54,3 ft)
Efficiency at BEP (%)54
Shutoff head20,2 m(66,2 ft)
Maximum flow (end of curve)35,4 m³/h(156 GPM)
NPSH requerido en el punto de máxima eficiencia0,945 m(3,1 ft)
Maximum power, water (end of curve)2,63 kW(3,53 HP)
Prestaciones calculadas
Shaft power at BEP2,27 kW(3,05 HP)
Head rise to shutoff (%)22
Preferred operating region, from19,1 m³/h(84 GPM)
Preferred operating region, to32,7 m³/h(144 GPM)
Motor
Standard motor rating3,73 kW(5 HP)
Motor frame184T
Verificación del motorNon-overloading
Max. specific gravity, non-overloading1,42

Productos relacionados

Imágenes

  • HV-2-8-17-outline.svg

Curvas de rendimiento

Head–capacity
510152025010203040 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0204060010203040 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
01234010203040 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.40.60.811.21.4010203040 Flow (m³/h) NPSHr (m)

Descargas