Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unités: Métrique
Base

Choisissez une unité par grandeur ; les autres suivent le système ci-dessus.

HV 2-8 vertical sump pump, 1,750 RPM

HV 2-8 vertical sump pump, 1,750 RPM

Modèle: HV-2-8-17

Vertical cantilever sump pump: the shaft is supported by two bearings above the mounting plate, with no bearings or seals below the liquid, so it can run dry and handle solids. Cast-iron casing and column, semi-open impeller, suction strainer, NEMA C-face TEFC premium-efficiency motor.

Spécifications

Taille et construction
Size2-8
Discharge size (in)2
Discharge connectionNPT threaded
Vitesse nominale1 750 RPM
ImpellerSemi-open
Diamètre de roue, maximal203 mm(8 in)
Impeller diameter, minimum trim152 mm(6 in)
Wetted materialsASTM A48 Class 30 cast iron, 416 SS shaft
Maximum solids size19 mm(3/4 in)
Maximum liquid temperature82,2 °C(180 °F)
Installation
Setting depth, as quoted914 mm(36 in)
Setting depths available24 in, 36 in, 48 in, 60 in
Mounting plate (square)508 mm(20 in)
Minimum submergence above inlet178 mm(7 in)
Minimum pit depth1 067 mm(42 in)
Weight with motor, as quoted97,5 kg(215 lb)
Hydraulique, roue maximale
Débit au point de meilleur rendement27,3 m³/h(120 GPM)
Hauteur au point de meilleur rendement16,6 m(54,3 ft)
Efficiency at BEP (%)54
Shutoff head20,2 m(66,2 ft)
Maximum flow (end of curve)35,4 m³/h(156 GPM)
NPSH requis au point de meilleur rendement0,945 m(3,1 ft)
Maximum power, water (end of curve)2,63 kW(3,53 HP)
Performances calculées
Shaft power at BEP2,27 kW(3,05 HP)
Head rise to shutoff (%)22
Preferred operating region, from19,1 m³/h(84 GPM)
Preferred operating region, to32,7 m³/h(144 GPM)
Moteur
Standard motor rating3,73 kW(5 HP)
Motor frame184T
Vérification du moteurNon-overloading
Max. specific gravity, non-overloading1,42

Produits associés

Images

  • HV-2-8-17-outline.svg

Courbes de performance

Head–capacity
510152025010203040 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0204060010203040 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
01234010203040 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.40.60.811.21.4010203040 Flow (m³/h) NPSHr (m)

Téléchargements