Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unidades: Métrico
Base

Elija una unidad para cualquier magnitud; las demás siguen el sistema de arriba.

HV 3-9 vertical sump pump, 1,750 RPM

HV 3-9 vertical sump pump, 1,750 RPM

Modelo: HV-3-9-17

Vertical cantilever sump pump: the shaft is supported by two bearings above the mounting plate, with no bearings or seals below the liquid, so it can run dry and handle solids. Cast-iron casing and column, semi-open impeller, suction strainer, NEMA C-face TEFC premium-efficiency motor.

Especificaciones

Tamaño y construcción
Size3-9
Discharge size (in)3
Discharge connectionASME B16.1 Class 125 FF flanged
Velocidad nominal1750 RPM
ImpellerSemi-open
Diámetro del impulsor, máximo229 mm(9 in)
Impeller diameter, minimum trim178 mm(7 in)
Wetted materialsASTM A48 Class 30 cast iron, 416 SS shaft
Maximum solids size25,4 mm(1 in)
Maximum liquid temperature82,2 °C(180 °F)
Instalación
Setting depth, as quoted1219 mm(48 in)
Setting depths available24 in, 36 in, 48 in, 60 in
Mounting plate (square)610 mm(24 in)
Minimum submergence above inlet229 mm(9 in)
Minimum pit depth1372 mm(54 in)
Weight with motor, as quoted146 kg(321 lb)
Hidráulica, impulsor máximo
Caudal en el punto de máxima eficiencia54,5 m³/h(240 GPM)
Altura en el punto de máxima eficiencia20,9 m(68,7 ft)
Efficiency at BEP (%)62
Shutoff head25,5 m(83,8 ft)
Maximum flow (end of curve)70,9 m³/h(312 GPM)
NPSH requerido en el punto de máxima eficiencia1,43 m(4,7 ft)
Maximum power, water (end of curve)5,8 kW(7,78 HP)
Prestaciones calculadas
Shaft power at BEP5,01 kW(6,72 HP)
Head rise to shutoff (%)22
Preferred operating region, from38,2 m³/h(168 GPM)
Preferred operating region, to65,4 m³/h(288 GPM)
Motor
Standard motor rating7,46 kW(10 HP)
Motor frame215T
Verificación del motorNon-overloading
Max. specific gravity, non-overloading1,29

Productos relacionados

Imágenes

  • HV-3-9-17-outline.svg

Curvas de rendimiento

Head–capacity
1015202530020406080 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
020406080020406080 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
02468020406080 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.511.52020406080 Flow (m³/h) NPSHr (m)

Descargas