Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unités: Métrique
Base

Choisissez une unité par grandeur ; les autres suivent le système ci-dessus.

HV 4-10 vertical sump pump, 1,750 RPM

HV 4-10 vertical sump pump, 1,750 RPM

Modèle: HV-4-10-17

Vertical cantilever sump pump: the shaft is supported by two bearings above the mounting plate, with no bearings or seals below the liquid, so it can run dry and handle solids. Cast-iron casing and column, semi-open impeller, suction strainer, NEMA C-face TEFC premium-efficiency motor.

Spécifications

Taille et construction
Size4-10
Discharge size (in)4
Discharge connectionASME B16.1 Class 125 FF flanged
Vitesse nominale1 750 RPM
ImpellerSemi-open
Diamètre de roue, maximal254 mm(10 in)
Impeller diameter, minimum trim191 mm(7-1/2 in)
Wetted materialsASTM A48 Class 30 cast iron, 416 SS shaft
Maximum solids size25,4 mm(1 in)
Maximum liquid temperature82,2 °C(180 °F)
Installation
Setting depth, as quoted1 219 mm(48 in)
Setting depths available24 in, 36 in, 48 in, 60 in
Mounting plate (square)610 mm(24 in)
Minimum submergence above inlet279 mm(11 in)
Minimum pit depth1 372 mm(54 in)
Weight with motor, as quoted198 kg(437 lb)
Hydraulique, roue maximale
Débit au point de meilleur rendement90,8 m³/h(400 GPM)
Hauteur au point de meilleur rendement25,8 m(84,8 ft)
Efficiency at BEP (%)68
Shutoff head31,5 m(103,5 ft)
Maximum flow (end of curve)118 m³/h(520 GPM)
NPSH requis au point de meilleur rendement1,92 m(6,3 ft)
Maximum power, water (end of curve)10,9 kW(14,59 HP)
Performances calculées
Shaft power at BEP9,39 kW(12,6 HP)
Head rise to shutoff (%)22
Preferred operating region, from63,6 m³/h(280 GPM)
Preferred operating region, to109 m³/h(480 GPM)
Moteur
Standard motor rating11,2 kW(15 HP)
Motor frame254T
Vérification du moteurNon-overloading
Max. specific gravity, non-overloading1,03

Produits associés

Images

  • HV-4-10-17-outline.svg

Courbes de performance

Head–capacity
1015202530350255075100125 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0204060800255075100125 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
246810120255075100125 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.511.522.530255075100125 Flow (m³/h) NPSHr (m)

Téléchargements