Halvard Pump Works
Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.
HM 1x0.75-4 sealless mag-drive pump, 3,500 RPM
Modelo: HM-1X0.75-4-35-SS
Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.
Especificaciones
| Tamaño y construcción | |
|---|---|
| Size | 1x0.75-4 |
| Suction size (in) | 1 |
| Discharge size (in) | ¾ |
| Connections | ASME B16.5 Class 150 RF flanged |
| Velocidad nominal | 3500 RPM |
| Diámetro del impulsor, máximo | 114 mm(4-1/2 in) |
| Impeller diameter, minimum trim | 88,9 mm(3-1/2 in) |
| Casing and impeller | ASTM A743 CF8M (316 SS) |
| Containment shell | 316 SS |
| Bushings | Sintered silicon carbide |
| Maximum working pressure | 15,5 bar(225 psi) |
| Maximum viscosity (cP) | 200 |
| Minimum continuous flow | 0,681 m³/h(3 GPM) |
| Acoplamiento magnético | |
| Magnets | Neodymium-iron-boron (NdFeB) |
| Maximum liquid temperature (magnet limit) | 121 °C(250 °F) |
| Magnetic coupling | M1 |
| Starting method | Across-the-line start OK |
| Hidráulica, impulsor máximo | |
| Caudal en el punto de máxima eficiencia | 5,68 m³/h(25 GPM) |
| Altura en el punto de máxima eficiencia | 20,9 m(68,7 ft) |
| Efficiency at BEP (%) | 35 |
| Shutoff head | 25,5 m(83,8 ft) |
| Maximum flow (end of curve) | 7,5 m³/h(33 GPM) |
| NPSH requerido en el punto de máxima eficiencia | 0,884 m(2,9 ft) |
| Maximum power, water (end of curve) | 1,07 kW(1,44 HP) |
| Prestaciones calculadas | |
| Shaft power at BEP | 0,924 kW(1,24 HP) |
| Head rise to shutoff (%) | 22 |
| Preferred operating region, from | 3,97 m³/h(17,5 GPM) |
| Preferred operating region, to | 6,81 m³/h(30 GPM) |
| Motor | |
| Standard motor rating | 1,12 kW(1,5 HP) |
| Motor frame | 143T |
| Verificación del motor | Non-overloading |
| Max. specific gravity, non-overloading | 1,04 |
| Dimensiones y peso | |
| Overall length | 691 mm(27,2 in) |
| Base to discharge face | 224 mm(8,8 in) |
| Weight with motor | 44,9 kg(99 lb) |
Productos relacionados
Standard motor
Imágenes
Curvas de rendimiento
- Maximum impeller
- Intermediate impeller
- Minimum impeller
- Maximum impeller
- Minimum impeller
- Standard motor rating
Descargas
- HM Sealless Mag-Drive Pumps — Installation, Operation & MaintenanceManual de instalación · 50 KB
- Chemical compatibility guide, wetted materialsDocumento · 49 KB
- ISO 9001:2015 certificate, Fort Wayne plantCertificado · 46 KB