Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unités: Métrique
Base

Choisissez une unité par grandeur ; les autres suivent le système ci-dessus.

HM 1x0.75-4 sealless mag-drive pump, 3,500 RPM

HM 1x0.75-4 sealless mag-drive pump, 3,500 RPM

Modèle: HM-1X0.75-4-35-SS

Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.

Spécifications

Taille et construction
Size1x0.75-4
Suction size (in)1
Discharge size (in)¾
ConnectionsASME B16.5 Class 150 RF flanged
Vitesse nominale3 500 RPM
Diamètre de roue, maximal114 mm(4-1/2 in)
Impeller diameter, minimum trim88,9 mm(3-1/2 in)
Casing and impellerASTM A743 CF8M (316 SS)
Containment shell316 SS
BushingsSintered silicon carbide
Maximum working pressure15,5 bar(225 psi)
Maximum viscosity (cP)200
Minimum continuous flow0,681 m³/h(3 GPM)
Accouplement magnétique
MagnetsNeodymium-iron-boron (NdFeB)
Maximum liquid temperature (magnet limit)121 °C(250 °F)
Magnetic couplingM1
Starting methodAcross-the-line start OK
Hydraulique, roue maximale
Débit au point de meilleur rendement5,68 m³/h(25 GPM)
Hauteur au point de meilleur rendement20,9 m(68,7 ft)
Efficiency at BEP (%)35
Shutoff head25,5 m(83,8 ft)
Maximum flow (end of curve)7,5 m³/h(33 GPM)
NPSH requis au point de meilleur rendement0,884 m(2,9 ft)
Maximum power, water (end of curve)1,07 kW(1,44 HP)
Performances calculées
Shaft power at BEP0,924 kW(1,24 HP)
Head rise to shutoff (%)22
Preferred operating region, from3,97 m³/h(17,5 GPM)
Preferred operating region, to6,81 m³/h(30 GPM)
Moteur
Standard motor rating1,12 kW(1,5 HP)
Motor frame143T
Vérification du moteurNon-overloading
Max. specific gravity, non-overloading1,04
Dimensions et poids
Overall length691 mm(27,2 in)
Base to discharge face224 mm(8,8 in)
Weight with motor44,9 kg(99 lb)

Produits associés

Images

  • HM-1X0.75-4-35-SS-outline.svg

Courbes de performance

Head–capacity
101520253002468 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
01020304002468 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
0.20.40.60.811.202468 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.40.60.811.21.402468 Flow (m³/h) NPSHr (m)

Téléchargements