Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Units: Imperial
Start from

Pick a unit for any quantity; the rest follow the system above.

HM 1.5x1-5 sealless mag-drive pump, 3,500 RPM

HM 1.5x1-5 sealless mag-drive pump, 3,500 RPM

Model: HM-1.5X1-5-35-SS

Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.

Specifications

Size & construction
Size1.5x1-5
Suction size (in)1½
Discharge size (in)1
ConnectionsASME B16.5 Class 150 RF flanged
Rated speed3,500 RPM
Impeller diameter, maximum5-1/4 in(133 mm)
Impeller diameter, minimum trim4 in(102 mm)
Casing and impellerASTM A743 CF8M (316 SS)
Containment shell316 SS
BushingsSintered silicon carbide
Maximum working pressure225 psi(15.5 bar)
Maximum viscosity (cP)200
Minimum continuous flow5 GPM(1.14 m³/h)
Magnetic coupling
MagnetsNeodymium-iron-boron (NdFeB)
Maximum liquid temperature (magnet limit)250 °F(121 °C)
Magnetic couplingM2
Starting methodAcross-the-line start OK
Hydraulics, maximum impeller
Flow at BEP50 GPM(11.4 m³/h)
Head at BEP93.5 ft(28.5 m)
Efficiency at BEP (%)42
Shutoff head114.1 ft(34.8 m)
Maximum flow (end of curve)65 GPM(14.8 m³/h)
NPSH required at BEP4.5 ft(1.37 m)
Maximum power, water (end of curve)3.26 HP(2.43 kW)
Calculated performance
Shaft power at BEP2.81 HP(2.1 kW)
Head rise to shutoff (%)22
Preferred operating region, from35 GPM(7.95 m³/h)
Preferred operating region, to60 GPM(13.6 m³/h)
Motor
Standard motor rating5 HP(3.73 kW)
Motor frame184T
Motor checkNon-overloading
Max. specific gravity, non-overloading1.53
Dimensions & weight
Overall length32.9 in(836 mm)
Base to discharge face10.3 in(262 mm)
Weight with motor157 lb(71.2 kg)

Related products

Images

  • HM-1.5X1-5-35-SS-outline.svg

Performance curves

Head–capacity
406080100120020406080 Flow (GPM) Total head (ft)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
01020304050020406080 Flow (GPM) Efficiency (%)
Power, water (SG 1.0)
012345020406080 Flow (GPM) Power (HP)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
234567020406080 Flow (GPM) NPSHr (ft)

Downloads