Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unités: Métrique
Base

Choisissez une unité par grandeur ; les autres suivent le système ci-dessus.

HM 1.5x1-5 sealless mag-drive pump, 3,500 RPM

HM 1.5x1-5 sealless mag-drive pump, 3,500 RPM

Modèle: HM-1.5X1-5-35-SS

Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.

Spécifications

Taille et construction
Size1.5x1-5
Suction size (in)1½
Discharge size (in)1
ConnectionsASME B16.5 Class 150 RF flanged
Vitesse nominale3 500 RPM
Diamètre de roue, maximal133 mm(5-1/4 in)
Impeller diameter, minimum trim102 mm(4 in)
Casing and impellerASTM A743 CF8M (316 SS)
Containment shell316 SS
BushingsSintered silicon carbide
Maximum working pressure15,5 bar(225 psi)
Maximum viscosity (cP)200
Minimum continuous flow1,14 m³/h(5 GPM)
Accouplement magnétique
MagnetsNeodymium-iron-boron (NdFeB)
Maximum liquid temperature (magnet limit)121 °C(250 °F)
Magnetic couplingM2
Starting methodAcross-the-line start OK
Hydraulique, roue maximale
Débit au point de meilleur rendement11,4 m³/h(50 GPM)
Hauteur au point de meilleur rendement28,5 m(93,5 ft)
Efficiency at BEP (%)42
Shutoff head34,8 m(114,1 ft)
Maximum flow (end of curve)14,8 m³/h(65 GPM)
NPSH requis au point de meilleur rendement1,37 m(4,5 ft)
Maximum power, water (end of curve)2,43 kW(3,26 HP)
Performances calculées
Shaft power at BEP2,1 kW(2,81 HP)
Head rise to shutoff (%)22
Preferred operating region, from7,95 m³/h(35 GPM)
Preferred operating region, to13,6 m³/h(60 GPM)
Moteur
Standard motor rating3,73 kW(5 HP)
Motor frame184T
Vérification du moteurNon-overloading
Max. specific gravity, non-overloading1,53
Dimensions et poids
Overall length836 mm(32,9 in)
Base to discharge face262 mm(10,3 in)
Weight with motor71,2 kg(157 lb)

Produits associés

Images

  • HM-1.5X1-5-35-SS-outline.svg

Courbes de performance

Head–capacity
101520253035051015 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
01020304050051015 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
01234051015 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.511.52051015 Flow (m³/h) NPSHr (m)

Téléchargements