Halvard Pump Works
Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.
HM 1.5x1-6 sealless mag-drive pump, 3,500 RPM
Model: HM-1.5X1-6-35-SS
Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.
Specifications
| Size & construction | |
|---|---|
| Size | 1.5x1-6 |
| Suction size (in) | 1½ |
| Discharge size (in) | 1 |
| Connections | ASME B16.5 Class 150 RF flanged |
| Rated speed | 3,500 RPM |
| Impeller diameter, maximum | 6-1/4 in(159 mm) |
| Impeller diameter, minimum trim | 4-1/2 in(114 mm) |
| Casing and impeller | ASTM A743 CF8M (316 SS) |
| Containment shell | 316 SS |
| Bushings | Sintered silicon carbide |
| Maximum working pressure | 225 psi(15.5 bar) |
| Maximum viscosity (cP) | 200 |
| Minimum continuous flow | 7 GPM(1.59 m³/h) |
| Magnetic coupling | |
| Magnets | Neodymium-iron-boron (NdFeB) |
| Maximum liquid temperature (magnet limit) | 250 °F(121 °C) |
| Magnetic coupling | M2 |
| Starting method | Soft starter or VFD required |
| Hydraulics, maximum impeller | |
| Flow at BEP | 70 GPM(15.9 m³/h) |
| Head at BEP | 132.6 ft(40.4 m) |
| Efficiency at BEP (%) | 48 |
| Shutoff head | 161.6 ft(49.3 m) |
| Maximum flow (end of curve) | 91 GPM(20.7 m³/h) |
| NPSH required at BEP | 5.5 ft(1.68 m) |
| Maximum power, water (end of curve) | 5.65 HP(4.21 kW) |
| Calculated performance | |
| Shaft power at BEP | 4.88 HP(3.64 kW) |
| Head rise to shutoff (%) | 22 |
| Preferred operating region, from | 49 GPM(11.1 m³/h) |
| Preferred operating region, to | 84 GPM(19.1 m³/h) |
| Motor | |
| Standard motor rating | 7.5 HP(5.59 kW) |
| Motor frame | 213T |
| Motor check | Non-overloading |
| Max. specific gravity, non-overloading | 1.33 |
| Dimensions & weight | |
| Overall length | 36.9 in(937 mm) |
| Base to discharge face | 11.7 in(297 mm) |
| Weight with motor | 226 lb(103 kg) |
Related products
Standard motor
Images
Performance curves
- Maximum impeller
- Intermediate impeller
- Minimum impeller
- Maximum impeller
- Minimum impeller
- Standard motor rating
Downloads
- HM Sealless Mag-Drive Pumps — Installation, Operation & MaintenanceInstallation manual · 50 KB
- Chemical compatibility guide, wetted materialsDocument · 49 KB
- ISO 9001:2015 certificate, Fort Wayne plantCertificate · 46 KB