Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unidades: Métrico
Base

Elija una unidad para cualquier magnitud; las demás siguen el sistema de arriba.

HM 1.5x1-6 sealless mag-drive pump, 3,500 RPM

HM 1.5x1-6 sealless mag-drive pump, 3,500 RPM

Modelo: HM-1.5X1-6-35-SS

Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.

Especificaciones

Tamaño y construcción
Size1.5x1-6
Suction size (in)1½
Discharge size (in)1
ConnectionsASME B16.5 Class 150 RF flanged
Velocidad nominal3500 RPM
Diámetro del impulsor, máximo159 mm(6-1/4 in)
Impeller diameter, minimum trim114 mm(4-1/2 in)
Casing and impellerASTM A743 CF8M (316 SS)
Containment shell316 SS
BushingsSintered silicon carbide
Maximum working pressure15,5 bar(225 psi)
Maximum viscosity (cP)200
Minimum continuous flow1,59 m³/h(7 GPM)
Acoplamiento magnético
MagnetsNeodymium-iron-boron (NdFeB)
Maximum liquid temperature (magnet limit)121 °C(250 °F)
Magnetic couplingM2
Starting methodSoft starter or VFD required
Hidráulica, impulsor máximo
Caudal en el punto de máxima eficiencia15,9 m³/h(70 GPM)
Altura en el punto de máxima eficiencia40,4 m(132,6 ft)
Efficiency at BEP (%)48
Shutoff head49,3 m(161,6 ft)
Maximum flow (end of curve)20,7 m³/h(91 GPM)
NPSH requerido en el punto de máxima eficiencia1,68 m(5,5 ft)
Maximum power, water (end of curve)4,21 kW(5,65 HP)
Prestaciones calculadas
Shaft power at BEP3,64 kW(4,88 HP)
Head rise to shutoff (%)22
Preferred operating region, from11,1 m³/h(49 GPM)
Preferred operating region, to19,1 m³/h(84 GPM)
Motor
Standard motor rating5,59 kW(7,5 HP)
Motor frame213T
Verificación del motorNon-overloading
Max. specific gravity, non-overloading1,33
Dimensiones y peso
Overall length937 mm(36,9 in)
Base to discharge face297 mm(11,7 in)
Weight with motor103 kg(226 lb)

Productos relacionados

Imágenes

  • HM-1.5X1-6-35-SS-outline.svg

Curvas de rendimiento

Head–capacity
10203040500510152025 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
010203040500510152025 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
02460510152025 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
0.511.522.50510152025 Flow (m³/h) NPSHr (m)

Descargas