Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unidades: Métrico
Base

Elija una unidad para cualquier magnitud; las demás siguen el sistema de arriba.

HM 2x1.5-6 sealless mag-drive pump, 3,500 RPM

HM 2x1.5-6 sealless mag-drive pump, 3,500 RPM

Modelo: HM-2X1.5-6-35-SS

Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.

Especificaciones

Tamaño y construcción
Size2x1.5-6
Suction size (in)2
Discharge size (in)1½
ConnectionsASME B16.5 Class 150 RF flanged
Velocidad nominal3500 RPM
Diámetro del impulsor, máximo159 mm(6-1/4 in)
Impeller diameter, minimum trim114 mm(4-1/2 in)
Casing and impellerASTM A743 CF8M (316 SS)
Containment shellHastelloy C-276
BushingsSintered silicon carbide
Maximum working pressure15,5 bar(225 psi)
Maximum viscosity (cP)200
Minimum continuous flow2,73 m³/h(12 GPM)
Acoplamiento magnético
MagnetsNeodymium-iron-boron (NdFeB)
Maximum liquid temperature (magnet limit)121 °C(250 °F)
Magnetic couplingM3
Starting methodAcross-the-line start OK
Hidráulica, impulsor máximo
Caudal en el punto de máxima eficiencia27,3 m³/h(120 GPM)
Altura en el punto de máxima eficiencia40,4 m(132,6 ft)
Efficiency at BEP (%)55
Shutoff head49,3 m(161,6 ft)
Maximum flow (end of curve)35,4 m³/h(156 GPM)
NPSH requerido en el punto de máxima eficiencia2,29 m(7,5 ft)
Maximum power, water (end of curve)6,31 kW(8,46 HP)
Prestaciones calculadas
Shaft power at BEP5,45 kW(7,31 HP)
Head rise to shutoff (%)22
Preferred operating region, from19,1 m³/h(84 GPM)
Preferred operating region, to32,7 m³/h(144 GPM)
Motor
Standard motor rating7,46 kW(10 HP)
Motor frame215T
Verificación del motorNon-overloading
Max. specific gravity, non-overloading1,18
Dimensiones y peso
Overall length986 mm(38,8 in)
Base to discharge face297 mm(11,7 in)
Weight with motor112 kg(248 lb)

Productos relacionados

Imágenes

  • HM-2X1.5-6-35-SS-outline.svg

Curvas de rendimiento

Head–capacity
1020304050010203040 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
0204060010203040 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
02468010203040 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
11.522.533.5010203040 Flow (m³/h) NPSHr (m)

Descargas