Halvard Pump Works
Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.
HM 2x1.5-6 sealless mag-drive pump, 3,500 RPM
Modèle: HM-2X1.5-6-35-SS
Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.
Spécifications
| Taille et construction | |
|---|---|
| Size | 2x1.5-6 |
| Suction size (in) | 2 |
| Discharge size (in) | 1½ |
| Connections | ASME B16.5 Class 150 RF flanged |
| Vitesse nominale | 3 500 RPM |
| Diamètre de roue, maximal | 159 mm(6-1/4 in) |
| Impeller diameter, minimum trim | 114 mm(4-1/2 in) |
| Casing and impeller | ASTM A743 CF8M (316 SS) |
| Containment shell | Hastelloy C-276 |
| Bushings | Sintered silicon carbide |
| Maximum working pressure | 15,5 bar(225 psi) |
| Maximum viscosity (cP) | 200 |
| Minimum continuous flow | 2,73 m³/h(12 GPM) |
| Accouplement magnétique | |
| Magnets | Neodymium-iron-boron (NdFeB) |
| Maximum liquid temperature (magnet limit) | 121 °C(250 °F) |
| Magnetic coupling | M3 |
| Starting method | Across-the-line start OK |
| Hydraulique, roue maximale | |
| Débit au point de meilleur rendement | 27,3 m³/h(120 GPM) |
| Hauteur au point de meilleur rendement | 40,4 m(132,6 ft) |
| Efficiency at BEP (%) | 55 |
| Shutoff head | 49,3 m(161,6 ft) |
| Maximum flow (end of curve) | 35,4 m³/h(156 GPM) |
| NPSH requis au point de meilleur rendement | 2,29 m(7,5 ft) |
| Maximum power, water (end of curve) | 6,31 kW(8,46 HP) |
| Performances calculées | |
| Shaft power at BEP | 5,45 kW(7,31 HP) |
| Head rise to shutoff (%) | 22 |
| Preferred operating region, from | 19,1 m³/h(84 GPM) |
| Preferred operating region, to | 32,7 m³/h(144 GPM) |
| Moteur | |
| Standard motor rating | 7,46 kW(10 HP) |
| Motor frame | 215T |
| Vérification du moteur | Non-overloading |
| Max. specific gravity, non-overloading | 1,18 |
| Dimensions et poids | |
| Overall length | 986 mm(38,8 in) |
| Base to discharge face | 297 mm(11,7 in) |
| Weight with motor | 112 kg(248 lb) |
Produits associés
Standard motor
Images
Courbes de performance
- Maximum impeller
- Intermediate impeller
- Minimum impeller
- Maximum impeller
- Minimum impeller
- Standard motor rating
Téléchargements
- HM Sealless Mag-Drive Pumps — Installation, Operation & MaintenanceManuel d’installation · 50 KB
- Chemical compatibility guide, wetted materialsDocument · 49 KB
- ISO 9001:2015 certificate, Fort Wayne plantCertificat · 46 KB