Halvard Pump Works
Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.
HM 3x1.5-6 sealless mag-drive pump, 3,500 RPM
Model: HM-3X1.5-6-35-SS
Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.
Specifications
| Size & construction | |
|---|---|
| Size | 3x1.5-6 |
| Suction size (in) | 3 |
| Discharge size (in) | 1½ |
| Connections | ASME B16.5 Class 150 RF flanged |
| Rated speed | 3,500 RPM |
| Impeller diameter, maximum | 6-1/4 in(159 mm) |
| Impeller diameter, minimum trim | 4-3/4 in(121 mm) |
| Casing and impeller | ASTM A743 CF8M (316 SS) |
| Containment shell | Hastelloy C-276 |
| Bushings | Sintered silicon carbide |
| Maximum working pressure | 225 psi(15.5 bar) |
| Maximum viscosity (cP) | 200 |
| Minimum continuous flow | 18 GPM(4.09 m³/h) |
| Magnetic coupling | |
| Magnets | Samarium-cobalt (SmCo) |
| Maximum liquid temperature (magnet limit) | 400 °F(204 °C) |
| Magnetic coupling | M4 |
| Starting method | Across-the-line start OK |
| Hydraulics, maximum impeller | |
| Flow at BEP | 180 GPM(40.9 m³/h) |
| Head at BEP | 132.6 ft(40.4 m) |
| Efficiency at BEP (%) | 60 |
| Shutoff head | 161.6 ft(49.3 m) |
| Maximum flow (end of curve) | 234 GPM(53.1 m³/h) |
| NPSH required at BEP | 9.6 ft(2.93 m) |
| Maximum power, water (end of curve) | 11.63 HP(8.67 kW) |
| Calculated performance | |
| Shaft power at BEP | 10.05 HP(7.49 kW) |
| Head rise to shutoff (%) | 22 |
| Preferred operating region, from | 126 GPM(28.6 m³/h) |
| Preferred operating region, to | 216 GPM(49.1 m³/h) |
| Motor | |
| Standard motor rating | 15 HP(11.2 kW) |
| Motor frame | 254T |
| Motor check | Non-overloading |
| Max. specific gravity, non-overloading | 1.29 |
| Dimensions & weight | |
| Overall length | 43.4 in(1,102 mm) |
| Base to discharge face | 12.7 in(323 mm) |
| Weight with motor | 346 lb(157 kg) |
Related products
Standard motor
Images
Performance curves
- Maximum impeller
- Intermediate impeller
- Minimum impeller
- Maximum impeller
- Minimum impeller
- Standard motor rating
Downloads
- HM Sealless Mag-Drive Pumps — Installation, Operation & MaintenanceInstallation manual · 50 KB
- Chemical compatibility guide, wetted materialsDocument · 49 KB
- ISO 9001:2015 certificate, Fort Wayne plantCertificate · 46 KB