Halvard Pump Works

Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.

Halvard Pump Works
Unidades: Métrico
Base

Elija una unidad para cualquier magnitud; las demás siguen el sistema de arriba.

HM 3x2-6 sealless mag-drive pump, 3,500 RPM

HM 3x2-6 sealless mag-drive pump, 3,500 RPM

Modelo: HM-3X2-6-35-SS

Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.

Especificaciones

Tamaño y construcción
Size3x2-6
Suction size (in)3
Discharge size (in)2
ConnectionsASME B16.5 Class 150 RF flanged
Velocidad nominal3500 RPM
Diámetro del impulsor, máximo159 mm(6-1/4 in)
Impeller diameter, minimum trim121 mm(4-3/4 in)
Casing and impellerASTM A743 CF8M (316 SS)
Containment shellHastelloy C-276
BushingsSintered silicon carbide
Maximum working pressure15,5 bar(225 psi)
Maximum viscosity (cP)200
Minimum continuous flow5,45 m³/h(24 GPM)
Acoplamiento magnético
MagnetsSamarium-cobalt (SmCo)
Maximum liquid temperature (magnet limit)204 °C(400 °F)
Magnetic couplingM4
Starting methodAcross-the-line start OK
Hidráulica, impulsor máximo
Caudal en el punto de máxima eficiencia54,5 m³/h(240 GPM)
Altura en el punto de máxima eficiencia40,4 m(132,6 ft)
Efficiency at BEP (%)64
Shutoff head49,3 m(161,6 ft)
Maximum flow (end of curve)70,9 m³/h(312 GPM)
NPSH requerido en el punto de máxima eficiencia3,44 m(11,3 ft)
Maximum power, water (end of curve)10,8 kW(14,53 HP)
Prestaciones calculadas
Shaft power at BEP9,36 kW(12,56 HP)
Head rise to shutoff (%)22
Preferred operating region, from38,2 m³/h(168 GPM)
Preferred operating region, to65,4 m³/h(288 GPM)
Motor
Standard motor rating11,2 kW(15 HP)
Motor frame254T
Verificación del motorNon-overloading
Max. specific gravity, non-overloading1,03
Dimensiones y peso
Overall length1102 mm(43,4 in)
Base to discharge face323 mm(12,7 in)
Weight with motor157 kg(346 lb)

Productos relacionados

Imágenes

  • HM-3X2-6-35-SS-outline.svg

Curvas de rendimiento

Head–capacity
1020304050020406080 Flow (m³/h) Total head (m)
  • Maximum impeller
  • Intermediate impeller
  • Minimum impeller
Efficiency
020406080020406080 Flow (m³/h) Efficiency (%)
Power, water (SG 1.0)
24681012020406080 Flow (m³/h) Power (kW)
  • Maximum impeller
  • Minimum impeller
  • Standard motor rating
NPSH required
12345020406080 Flow (m³/h) NPSHr (m)

Descargas