Halvard Pump Works
Centrifugal and diaphragm pumps for water, process and chemical duty — every curve tested, every motor matched.
HM 3x2-6 sealless mag-drive pump, 3,500 RPM
Modèle: HM-3X2-6-35-SS
Sealless magnetic-drive centrifugal pump: no shaft seal, the impeller is driven through a containment shell by a synchronous permanent-magnet coupling, so the liquid cannot leak past a seal. 316 stainless casing and impeller, silicon-carbide bushings, NEMA C-face TEFC premium-efficiency motor. For acids, solvents and other liquids that must not escape.
Spécifications
| Taille et construction | |
|---|---|
| Size | 3x2-6 |
| Suction size (in) | 3 |
| Discharge size (in) | 2 |
| Connections | ASME B16.5 Class 150 RF flanged |
| Vitesse nominale | 3 500 RPM |
| Diamètre de roue, maximal | 159 mm(6-1/4 in) |
| Impeller diameter, minimum trim | 121 mm(4-3/4 in) |
| Casing and impeller | ASTM A743 CF8M (316 SS) |
| Containment shell | Hastelloy C-276 |
| Bushings | Sintered silicon carbide |
| Maximum working pressure | 15,5 bar(225 psi) |
| Maximum viscosity (cP) | 200 |
| Minimum continuous flow | 5,45 m³/h(24 GPM) |
| Accouplement magnétique | |
| Magnets | Samarium-cobalt (SmCo) |
| Maximum liquid temperature (magnet limit) | 204 °C(400 °F) |
| Magnetic coupling | M4 |
| Starting method | Across-the-line start OK |
| Hydraulique, roue maximale | |
| Débit au point de meilleur rendement | 54,5 m³/h(240 GPM) |
| Hauteur au point de meilleur rendement | 40,4 m(132,6 ft) |
| Efficiency at BEP (%) | 64 |
| Shutoff head | 49,3 m(161,6 ft) |
| Maximum flow (end of curve) | 70,9 m³/h(312 GPM) |
| NPSH requis au point de meilleur rendement | 3,44 m(11,3 ft) |
| Maximum power, water (end of curve) | 10,8 kW(14,53 HP) |
| Performances calculées | |
| Shaft power at BEP | 9,36 kW(12,56 HP) |
| Head rise to shutoff (%) | 22 |
| Preferred operating region, from | 38,2 m³/h(168 GPM) |
| Preferred operating region, to | 65,4 m³/h(288 GPM) |
| Moteur | |
| Standard motor rating | 11,2 kW(15 HP) |
| Motor frame | 254T |
| Vérification du moteur | Non-overloading |
| Max. specific gravity, non-overloading | 1,03 |
| Dimensions et poids | |
| Overall length | 1 102 mm(43,4 in) |
| Base to discharge face | 323 mm(12,7 in) |
| Weight with motor | 157 kg(346 lb) |
Produits associés
Standard motor
Images
Courbes de performance
- Maximum impeller
- Intermediate impeller
- Minimum impeller
- Maximum impeller
- Minimum impeller
- Standard motor rating
Téléchargements
- HM Sealless Mag-Drive Pumps — Installation, Operation & MaintenanceManuel d’installation · 50 KB
- Chemical compatibility guide, wetted materialsDocument · 49 KB
- ISO 9001:2015 certificate, Fort Wayne plantCertificat · 46 KB